WT01+WT02 70MHz‑6GHz 1-10KM Passive Drone Detection & DJI Remote ID Decode Kit for Low‑altitude Security
Product Overview
WT01+WT02 is a collaborative passive RF solution for low‑altitude security. WT01 handles full‑band drone signal detection, signal classification, RSSI reading, multi‑antenna direction‑finding and real‑time spectrum capture.
WT02 focuses on DJI Remote‑ID parsing, outputting drone location, pilot location, home‑point, serial number and drone model. Working flow: detect signal → get direction → decode identity & coordinates. Pure receiving hardware without RF transmission, suitable for perimeter safety and anti‑drone early‑warning projects.
Product Features
Dual‑module collaborative system：Signal reconnaissance + direction‑finding + DJI RID identity decoding WT01:70MHz‑6GHz wide frequency, detect DJI, Autel, Analog FPV, Walksnail, LoRa, Modified‑LTE drones; open‑air detect range 1‑10km Support 8/16‑antenna amplitude‑comparison direction‑finding, output 2048‑point FFT spectrum raw data WT02: FPGA 61.44M sampling rate; local O3 plaintext decode, O4 ciphertext decoded via dedicated server, compliant GB42590‑2023 & ASTM F3411‑22a On‑device computing, output by UDP / TCP /3.3V‑TTL(115200 baud) Each module：89×55×18mm metal shell, DC5V, 3.3W power; WT01 dual‑RX for better low‑frequency reception Rich AT commands for band, gain, IP, antenna setting; easy system integration Passive‑only receiving, no RF emission, support OEM / ODM service
Product Parameters
| Item |
Specification |
| Product Model |
WT01 + WT02 Combined Kit |
| WT01 Frequency Range |
70MHz‑6GHz |
| WT01 Detect Range |
1‑10km (open‑air environment) |
| WT02 DJI Detect Range |
Up to 2km |
| WT02 RID Decode Range |
1‑3km |
| Supported Standard |
GB42590‑2023, ASTM F3411‑22a |
| Data Interface |
UDP, TCP, 3.3V TTL UART (115200,8N1) |
| Power Supply |
DC 5V per module |
| Power Consumption |
3.3W per module（WT01 2R2T mode +0.5W） |
| Module Dimension |
89 × 55 ×18 mm (each) |
| Direction‑Finding |
WT01 GPIO control for external 8/16‑port RF switch |
| Working Mode |
Pure Passive RF Receiving (No transmitting) |
Q1: What are WT01 and WT02 used for?
A: WT01 scans multi‑brand drone signals and supports direction‑finding & spectrum output. WT02 decodes DJI Remote‑ID for GPS location and serial information. Combined set achieves complete drone situational awareness for low‑altitude security. Two modules can also run independently.
Q2: What drones can this kit detect?
A: WT01 supports DJI, Autel, analog FPV, Walksnail, LoRa, Modified‑LTE drones. WT02 decodes DJI O3 / O4 series Remote‑ID data.
Q3: What is the actual detection distance?
A: WT01：1‑10km (open area, affected by antenna & obstacles). WT02 DJI detection max 2km, RID decode range 1‑3km.
Q4: Does WT02 fully decrypt DJI O4 onboard?
A: DJI O3 RID can be decoded locally. DJI O4 outputs 176‑byte encrypted payload, decryption requires our dedicated decryption server API.
Q5: What accessories are included?
A: Standard kit contains WT01 and WT02 main modules. Antennas, SP8T/SP16T RF switch and cables are optional, sold separately.
Q6: Can I integrate them into my existing security system?
A: Yes. We provide datasheet, AT command manual and test logs. OEM & ODM customization is acceptable.
Q7: Is this device a drone jammer?
A: No. This kit is pure passive receiving hardware. It only monitors and decodes wireless signals, no RF transmitting and no jamming function.
